Accessories
Cycle Analyst E-Bike Computer
The Cycle Analyst, made in Vancouver Canada is the first Watt-hour meter specifically designed for Electric Bicycles. The Cycle Analyst measures instantaneous, volts, amps, and watts. In addition it measures accumulated amp-hours, and tracks battery charge-discharge cycles. It's just the instrument for maximizing your range on a charge and optimizing battery cycle life.
We modify the basic Cycle Analyst by adding the appropriate connectors for the Electric Mid-Drive system and increasing the wire length to work with recumbent bicycles. ACC-CA is the standalone product. Use ACC-CAWK with purchase of a kit at the same time.
ACC-CA$225
ACC-CAWK$150
Knob XL computer mount
Short round extension mounts at right angles to any diameter tube. Can be used to mount the Cycle Analyst on handlebar stems or frame tubes.
ACC-KNOBXL$15
Power Extension Cable
Two feet of extra battery power cable. 50 Amp rated MiniFit Sr. connectors on both ends. Can be used to extend cable from battery to motor controller or from switch box to motor controller.
ACC-PWRX$25
Security Bolt Kit
Security bolts to fit most frame adapters. These replace two of the M5 attach bolts with tamper resistant types.
ACC-SB$45
Battery Lock and Cable Set
Kryptonite pad lock and cable set for securing battery to bike frame. 5 mm braided steel cable. Laminated steel padlock with hardened shackle and 2 keys.
ACC-BTLK$45
Dual Battery Adapter
Allows you to run two battery packs in parallel to double your battery capacity. New for 2011 is a feature to protect your controller from transient over voltages that are absorbed by your battery in single systems but which are not in dual battery systems.
ACC-DPBAT$195
